Cosmetic packaging materials

1. Airless bottle: cover, shoulder cover, vacuum pump. Use by air pressure. The matching spray head has a chicken tip (either full plastic or a layer of anodized aluminum on the outside), and a flat duck head with a layer of plastic on the outside.

2. Lotion bottle: consists of cap, shoulder cover, lotion pump. Most are equipped with hoses. Most are made of acrylic and PP. The cover is ABS inside acrylic. If the dairy industry is poor

3. Perfume bottle: 1. The internal composition is glass and aluminum (rotation and non-rotation according to the cover) 2. PP bottle (full injection of PP) 3. Glass drip irrigation 4. The inner liner of perfume bottles is mostly Glass and PP. Large-capacity glass should be used because of the long storage time. PP is suitable for short-term storage of small capacity. PCTA and PETG are mostly not perfumed.

4, cream bottles: there are outer caps, inner caps, outer bottles, liner.

A. External acrylic, internal PP material. The lid is made of ABS with a layer of PP gasket inside.

B. Inner ceramics, anodized aluminum outside PP, anodized aluminum outside the lid, and ABS inside the PP are added with a layer of PP gasket.

C. Full PP bottle with a layer of PP gasket inside.

D. External ABS internal PP. There is a layer of PP gasket.

5. Blow-molded bottles: mostly made of PET. There are three types of covers: Chiaki, flip and screw caps. Blow molding is the direct blowing of preforms. It is characterized by a bump on the bottom of the bottle. Brighter in light.

6. Blow bottle: mostly made of PP or PE. There are three types of covers: Chiaki, flip and screw caps. The blow bottle is a process that combines blow molding and blow molding into one, and only requires one mold. It is characterized by a glued line at the bottom of the bottle.

7, aluminum-plastic hose: the innermost is PE material is aluminum packaging outside. And offset printing. After cutting, re-rolling. Divided into round tube, flat tube, oval tube according to the tube head. In terms of price: round tube <elliptical tube <flat tube

8, all plastic hose: all PE material, and pull out the hose before cutting, offset printing, silk printing, hot stamping. Divided into round tube, flat tube, oval tube according to the tube head. In terms of price: round tube <elliptical tube <flat tube.